It looks like you are using an ad blocker. That's okay. Who doesn't? But without advertising revenue, we can't keep making this site awesome. Click the link below for instructions on disabling adblock.
Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
Where do you put the wire through from the inside of your car to get to the battery? I can't find a spot.. do you have to take some stuff apart to get through or what?
the firewall should have a grommet in there where all the wiring from the inside goes to the outside. usually on the driver side. sometimes its in the middle though
if you tell me what kind of car you have i can help. if you want you can drill a whole like a mm bigger than you wire fit it through, somewhere hiden though so it looks clean and just seal it when your done.
go into the engine bay of the car in both cars. look for a large grouping of wires usualy on the top right or left side, fallow them to where they pass through the fire wall. when you find this pull away the rubber from eather the inside or outside what ever is easier. you wont be able to completly remove the rubber piece out of the car but move it so you can access it easier. then cut like an x in it like the top of a plastic thing on a cup where you put the straw in then just feed the wire through that.
run the wire just below the weather strippin gon your hood, all the way to your passenger mirror, through the little gap betwen your hood and your fender, in through your door frame, right into the carpet.