Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Forward pressure

profile picture
tsuji
Posts: 186 - Karma: 10
ne one know where the forward pressure ajustment screw is on the 810s?
Mar 16 2006 8:55PM
0 0
profile picture
tsuji
Posts: 186 - Karma: 10
bump
Mar 16 2006 9:53PM
0 0
profile picture
real9999
Posts: 652 - Karma: 10
No screw, there's a metal tab behind the heel. When the boot is clicked in, the arrows on the tab should be within the scribe marks on the mouting track.
Mar 16 2006 9:55PM
0 0
profile picture
squibble
Posts: 4569 - Karma: 104
yep^ adjust it with by adjusting the heel and toe pieces
Mar 16 2006 10:32PM
0 0
profile picture
Anathema
Posts: 21048 - Karma: 5,061
bingo. use a screwdriver and lift the tab to slide the heelpiece forward or back. it's basically trial and error. move it up or back a notch, clip the boot in, and continue to do this until the little marks on the tab are centred. it's hard to explain, but if you check it out, you'll understand.
Mar 16 2006 10:58PM
0 0
profile picture
Spitzer
Posts: 534 - Karma: 10
Your toe piece has to be properly set up before you can adjust the forward pressure. If your wings aren't properly set up, then your forward pressure is gonna be off.

The wings have to be set so that your boot has 3 points of contact on the toe piece (1 point in the front, 2 on the wings).
Mar 17 2006 1:16AM
0 0
profile picture
tsuji
Posts: 186 - Karma: 10
thanks a lot for the help.
Mar 17 2006 1:16PM
0 0
All times are Eastern (-5)