Member of the Month

Biffbarf
February, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Backyard Rails

profile picture
wag19
Posts: 8 - Karma: 10
Hey guys,

Im looking to build my own backyard rail. I just want a simple rail that i can learn on, like a box rail or something would do. Probably about 2 -3 feet high. It doesnt have to be anything special, just something that won't break. Let me know if you have any suggestions or good links. I'm sure there is SOME site out there that explains it, but I'm yet to come acrossed it. Thanks Again..

Wag 19
22 years ago
0 0
profile picture
PipeMonkey
Posts: 398 - Karma: 8
you can just make a rail out of a pvc pipe, it is the cheapest and easiest way to make one

Proud owner of JJ's Jump Park
22 years ago
0 0
profile picture
Mr.Cheese
Posts: 422 - Karma: 2
nooooooo don't use pvc pipe!!!!!!!it's plastic tubing there's no way it's gonna stand up to skis, use real metal, or wood, try lookin at some skateboard sites, they always have prints for rails, it's the same thing, but whatever. i'm using the top of an old swing set, the kind you get at walmart or canadian tire, it works really well
RES
22 years ago
0 4
profile picture
Mr.Cheese
Posts: 422 - Karma: 2
or snipe one from a cronstruction site, there's always pipes around, or if you find an old highway sign, take that rail, they are really good
RES
22 years ago
0 0
profile picture
Jackpot
Posts: 4243 - Karma: 138
PVC = easiest to make, cheapest to buy etc. BUT like mah man mr.cheese said, if ur starting out, sometimes your edges wreak havoc on PVC

RES
22 years ago
1 0
profile picture
1212j5j5
Posts: 4495 - Karma: 14
Mr cheese = dumbass. i have a pvc rail, it works wickedly. just get it atleast 3 inch diametre. and get some bolts, drill through, and bolt it to the wood. problem solved. but if your going high tech, talk to mauii, that guys a genius.
22 years ago
1 0
profile picture
1212j5j5
Posts: 4495 - Karma: 14
and it slides really nice when it is cold out :D. slides like metal. it is slower sliding, doesnt hurt as much, and you fall les easily =good rail for beginner. also, mine cost 20 dollars to make, including the 13 feet of pipe, the 20 feet of wood,m and 2 bolts, from hm hrdwre.
22 years ago
0 0
profile picture
Freeski424
Posts: 173 - Karma: 10
I use pvc too, but I've been thinking of making one framed with wood, (2 by 4, or 4 by 4's) then one long 2 by 4 on top with sheet metal or roofing metal flashing on top. That stuff is so malleable that you could bend it to make it a nice flat top rail, like most mountains have, only on a budget.
22 years ago
0 0
profile picture
Freeskier22
Posts: 991 - Karma: 19
I have a 9 foot pvc, ( learning rail, and am going to make a17 fotter, USE pvc to learn, It wont wreck ur edges and is cheap and easy to build

22 years ago
0 0
profile picture
Big-L
Posts: 499 - Karma: 10
yup mr. cheese is a fag
22 years ago
1 2
profile picture
jakes
Posts: 173 - Karma: 10
i had a 12 foot pvc rail for like 2 years.... there all right for learning but if you wanna keep trying new stuff and not have to worry about a messed up rail find a way to make a metal rail
22 years ago
0 0
profile picture
PipeMonkey
Posts: 398 - Karma: 8
Unless you have access to some welding equipment you can't really make a good metal rail or atleast a double barrelled one, but with pvc its eeasy as hell. You can even make kinks pretty easily too.

Proud owner of JJ's Jump Park
22 years ago
0 0
profile picture
wag19
Posts: 8 - Karma: 10
Thanks guys/girls... I think i'll go with the PVC for starters. You guys rock \m/

-wag19




~~~~~~~~~*~~~~~~~~~~
Madgrab Yeah!
22 years ago
0 0
profile picture
SmokedGouda
Posts: 1184 - Karma: 6,702
Felt like exploring. Giving this a good bump.
3 years ago
1 1
profile picture
STEEZUS_CHRI5T
Posts: 3014 - Karma: 23,155
OP closed the thread 19 years ago, sounds like a solution was found. Is there anything more to add?
3 years ago
0 0
profile picture
SmokedGouda
Posts: 1184 - Karma: 6,702
STEEZUS_CHRI5TOP closed the thread 19 years ago, sounds like a solution was found. Is there anything more to add?

its the oldest thread on ski gabber that I could find or add insight too.
3 years ago
0 2
profile picture
pissnu_skis
Posts: 435 - Karma: 6,919
This thread is older than me
3 years ago
3 0
profile picture
theabortionator
Posts: 52268 - Karma: 170,010
SmokedGoudaFelt like exploring. Giving this a good bump.


Why though
3 years ago
0 0
All times are Eastern (-4); Currently it's 9:59AM