Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
Brakes for rossi fks or look p15/18
Posts: 18
-
Karma: 10
Hi. I have a pair of public enemys but have broken several marker and tyrolia bindings so have dicided on fks or p15/18. But will they fit or do I need a wide brake or can I use any wide brake from rossi or look and it will still work on fks or p15/18?
Hope someone can help...
Joachim
Posts: 13785
-
Karma: 1,956
you have to do a custom bend as there are no wide breaks made for those bindings.
Posts: 6301
-
Karma: 349
actually, next year rossi is making a freeride version of the FKS 185. its all black, and has wide brakes
Posts: 34
-
Karma: 10
Like said you have to bend them. That said though, it should be pretty easy to bend just to fit Public Enemy's. Just stick the brake in a vice and use a pipe to bend it out. TGR has a pretty good thread on how to bend them if you want to take a look before considering.
Posts: 18
-
Karma: 10
thanks for the good replies...sounds cool with a freeride model...
Joachim, Whistler B.C.
Posts: 2709
-
Karma: 160
the all black fks bindings have been available all this year! no there is not a wide break nor will there ever be rossi is discontinuing the fks binding for next year they will have arace version of the newer pivot series
Posts: 764
-
Karma: 11
Can the breaks be bent out to around 103 cm width???
Posts: 3862
-
Karma: 140
The brakes can be bent out to 130 if you know what you're doing.
Posts: 0
-
Karma: 87
You can easily bend to 105mm, I have them on 102's and they still work fine and thats just with a little bend, if you actually take the brakes apart and bend them in a clamp you could fit them on 130 prophets
Posts: 2683
-
Karma: 12
just stick them in a vice and heat them up and then bend.
All times are Eastern (-5)
