Member of the Month

Dlonetti
August, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

BACKYARD RAILS

profile picture
Cooldude
Posts: 272 - Karma: 10
What kind of back yard rails do people have? Straights and kinks or what? What did you make them out of? What are you using for the sliding surfice, and if its a rainbow, c or s, how the hell did you bend your material? Last question, did it cost a shit load of money?!! If anyone has pictures those would be sick too!
Jan 1 2003 4:08PM
0 0
profile picture
BMit
Posts: 1526 - Karma: 218
ive got a 10 foot long bike rack that we stole from a community center, i made a 12 foot single kink rail in tech class at school, and we have an 8 foot box thats covered with crazy carpet, works great. we used to have a trapezoid with pvc on the top but it was weak and we destroyed it
Jan 1 2003 4:10PM
0 0
profile picture
hugeairkid
Posts: 1802 - Karma: 29
I built a 30 foot curved rail. I used PVC for the rail and plywood and 6 braces. The plywood was a little soft so i attached them together when they were bent. Works soo well.
' Just jump it. What have you got to lose but your life'
Jan 1 2003 4:47PM
0 0
profile picture
canonrider
Posts: 2635 - Karma: 29
i have a 20 foot pvc curved rail i stole from a construction site, and i made a 15 foot metal rail in tech class, and when i get bored, i tilt the 15 footer so the one side is right at the ground, and it is a big upwards rail, and i put a bucket under it so it stays up... upwards rails are fun...
Jan 1 2003 4:52PM
0 0
profile picture
evanstp
Posts: 280 - Karma: 247
yea i got a 20 ft. pvc pipe rail. it consists of 4 dif. pieces of pvc pipe. they are 2 pvc wide and also 2 pvc long. it stands about 3 feet of the ground from start to finish and is just a straight rail. It slides nice and smooth like butta.

Jan 1 2003 8:16PM
0 0
profile picture
rossignolpowair3
Posts: 369 - Karma: 8
i have 2 20ft rails .. i got them from a construction site.
E-A-S-T--C-O-A-S-T
http://sixothree.com
Jan 1 2003 8:37PM
0 0
profile picture
threejay
Posts: 2584 - Karma: 15
i got a 25 foot round rail that a freind welded for me.



well to keep it real I started being a Poser Poser. I dress and act like a poser, but i'm not really a poser. I just pose to look like a poser posing. you know just keepin it underground
-youthinasia
Jan 1 2003 9:55PM
0 0
profile picture
dave_euler
Posts: 1699 - Karma: 391
i have a 30ft. down/flat single kink pvc, it cost nothing, i just found them behind my shed
Jan 1 2003 9:55PM
0 0
profile picture
SwitchMisty540
Posts: 1862 - Karma: 629
i got a 12 foot downward slant rail, an 8 foot rainbow, and a 12 straight rail...all of them are made out of pvc and were basically free to make cuz i stole all the wood and shit from my neighbors backyards. i'm building another one that is gonna be ill as hell. its gonna be a flat rail to kink, then at the bottom of the kink it is gonna curve into a rainbow rail, then at the bottom of the rainbow there is gonna be little c rail. i'll post pictures when im done.
Jan 1 2003 10:25PM
0 0
profile picture
R.Fahey
Posts: 8602 - Karma: 539
i have two rails. a 8 foot long 3 foot tall flat and a 3 foot tall dwon to 1 ft. tall slope rail. and i put em together to make 4 diff rails. flatbar....down slope.... kink...upkink. and i took thw wood from my neighbor so ti was free. and i used ovc conduit as the slidng surface.
Jan 1 2003 10:52PM
0 0
profile picture
Cooldude
Posts: 272 - Karma: 10
Thanks alot you guys are giving me some killer ideas
Jan 2 2003 6:25PM
0 0
profile picture
dave_euler
Posts: 1699 - Karma: 391
i made some new ones today, i used a part of an old swing set (monkey bars i think) for a 4ft. high, 10 ft. long box, and also a double kink. For that it was picnic table to two 2x4's. That was about 25 feet long.
Jan 2 2003 6:35PM
0 0
profile picture
RossiScratch-411
Posts: 777 - Karma: 18
check out the 'backyard riz' vid in the vid section, that is mine, just a box with 2 schedule 40 pvc sections drilled together and drillied to the box and connected toa box on the downside as well







MCM Rip Shit uP
What MTn. Creek Will BEcome

p[r[o[g[r[e[s[s[i[o[n[ o[b[s[e[s[s[i[o[n
Jan 2 2003 6:39PM
0 0
profile picture
404404
Posts: 11358 - Karma: 21,033
Some kids that I ski woth have a 20 foot single kinked rail and 32 foot strait rail, there dad welded it.
Jan 2 2003 7:19PM
0 0
profile picture
Baker
Posts: 1615 - Karma: 18
I have a 12 foot flat double barreled, 20 ft flat, 20 ft A-frame and, 20 ft. C rail. They are all metal and welded quite nicely by me and my friend. The cost from 60 to 100 each, but it is well worth having metal rails.



__________________________________________________
Jackson Hole represent!

'Loyd, you can't triple stamp a double stamp! Loyd!'
Jan 2 2003 7:28PM
0 0
profile picture
schlonginator
Posts: 3971 - Karma: 27
I have a massive 60ft tall loop the loop rail to 70ft quad qinked rail.....

and a 6 and a half inch floppy since we're all comparing hardware




___________________________________

'hey schlonginator you can lick the crusties out of my ass you fuckstick. i am going to shit on your face then fuck your mouth
you there get down on this throbbing pole of hot man chickken' - Wiener

So weiner does this mean you have crusties up your ass?? Must be dried up cum flakes from your boyfriend's little pecker.

And whats the deal with 'hot man chicken' are you comparing your penis to a chicken? maybe the width of your cock is the size of a chicken's cock


Just JIB it !!


Jan 2 2003 7:48PM
0 0
profile picture
stupid3000
Posts: 558 - Karma: 10
i got a 18 foot flat-down-flat rail, my dad is a welder, he built it out of alumium



-------------------------------------
*~Riann~*

'emancipate yourself from mental slavery, none but ourselves can free our minds'- Bob Marley
Jan 2 2003 8:02PM
0 0
profile picture
Baker
Posts: 1615 - Karma: 18
aluminum? yikes!



__________________________________________________
Jackson Hole represent!

'Loyd, you can't triple stamp a double stamp! Loyd!'
Jan 2 2003 9:26PM
0 0
All times are Eastern (-4)