Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Elizabeths and Look Bindings

profile picture
JackieTreehorn
Posts: 166 - Karma: 10
I got an email from Dan at twintipnation saying the following--"The PX 12 Ti binding will not fit the Elizabeth even with the wide brake. However, the Reactor 10 will fit just fine with Lines Fat Brake 130" is this BS? i was under the impression you could mount Looks on such a fat ski if you had a fat brake. Any info. would be a lot of help.
Nov 16 2005 11:01AM
0 0
profile picture
bdskier
Posts: 932 - Karma: 14
I have p12's on my spatulas 125 waist, you just have to bend the brakes.
Nov 16 2005 1:42PM
0 0
profile picture
japanada
Posts: 13784 - Karma: 1,957
yeah the look wide brakes for the PXs are only good to 100mm on the p12s they were good to about 110
Nov 16 2005 1:46PM
0 0
profile picture
skihillraod
Posts: 1852 - Karma: 45
you still have to get the wide brake just so you will have enough to work with to bend out to 110, I didn't check if the px brake was removable like the old pivot but I would hope so to make it easier.
If so just pull the brake housing to one side and pull straight out, they are connected with a one way metal piece that fits like a tooth into the heelpiece, good luck you should go for it since the px has good forward pressure for switch pow pow. (I would still want the turntable, those sticks would own me and blow my knees up in bad fall)
Nov 16 2005 2:30PM
0 0
profile picture
dantwintipnation
Posts: 17 - Karma: 13
We have a call into Look to see what is the maximum width the PX 12 Ti Wide Brake can handle. No answer yet, which is expected since the season is about to unfold.

But the PX 12 Ti's brake is simply removed by a single screw. The replacement to the wide brake is very simple.

I will keep you all posted when I hear anything.
Nov 16 2005 2:52PM
0 0
profile picture
dantwintipnation
Posts: 17 - Karma: 13
We got word back from Look regarding the wide brake and this is what they said.

"According to the tech manual it will fit up to a 98 mm width. You can tweek
them a little to make them a bit wider.
"

Hope this helps.
Nov 17 2005 12:24PM
0 0
profile picture
lpskier5
Posts: 883 - Karma: 118
98 mm and 130 mm are a big difference, id justgot with the lines, cus its hard to bend a brake that much and still have it work well
Nov 17 2005 12:28PM
0 0
profile picture
MagSeven
Posts: 1000 - Karma: 412
You can bend them no problem. I've done it on mine.

Click for larger image

And if that doesn't work, just click the link https://www.newschoolers.com/ns3/web/content/pictures.php?img=59885&
Nov 17 2005 1:26PM
0 0
profile picture
MagSeven
Posts: 1000 - Karma: 412
Click for larger image
Nov 17 2005 1:28PM
0 0
profile picture
Tha_Grouch
Posts: 2216 - Karma: 14
If it were up to me... i'd go with the line bindings...
Nov 17 2005 1:32PM
0 0
profile picture
wazzucrewskier
Posts: 2269 - Karma: 151
SHUT THE FUCK UP DONNY!

jk, i thought since your name was jakie treehorn that you would enjoy the big lebowski ref.
Nov 17 2005 1:44PM
0 0
profile picture
J.D.
Posts: 21362 - Karma: 5,142
You can bend them that wide... just don't do it too quickly.
Nov 17 2005 2:07PM
0 0
profile picture
bret
Posts: 2845 - Karma: 833
yup. i have the looks on my lizas and there's no problem with bending them out.
Nov 17 2005 4:51PM
0 0
profile picture
wev-skis
Posts: 564 - Karma: 10
what kind of bindings do u have on your lizzy's im looking for some good bindings for mine.
Mar 27 2006 10:02AM
0 0
profile picture
wazzucrewskier
Posts: 2269 - Karma: 151
i have the rossi scratch 140 bindings, which are the exact same as the looks. the skis have a 110 waist, and the brakes ar 100, so they have to bend them a bit, but it is possible.
Mar 27 2006 11:35AM
0 0
profile picture
Capt.Flannel
Posts: 10928 - Karma: 36
ahahaah spot on, spot on.
Mar 27 2006 11:45AM
0 0
profile picture
powfoka
Posts: 2709 - Karma: 160
any brake can fit any ski with enough bending
Mar 27 2006 1:36PM
0 0
profile picture
joshbryant
Posts: 2133 - Karma: 228
I've bent PX brakes to fit over a prophet 130.
Mar 27 2006 2:39PM
0 0
profile picture
powfoka
Posts: 2709 - Karma: 160
i just bent fks 185 over some elizabeths and another pair of fks 155s over the prophet 130
Mar 27 2006 2:42PM
0 0
All times are Eastern (-5)