Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Edge tuning

profile picture
-_-
Posts: 574 - Karma: 10
i think i am going to tune my own skis from now on, so i have a lot of questions to ask . so can some of you provide me with some tips or refer me to a nice reliable site for doing such things?

so far i have gotten a 88 degree ice buster, a horse hair brush, pink wax, and a scraper. i have watched this kuu video about tuning with rob budler in it when he was like 30 years old, so it's an older vid.

well anyway i started sharpening the edges, but i can't seem to get it all shiny. it has like scratch marks on it but it's still smooth to the touch and the edges felt pretty sharp. is there anyway to get it all shiny(ie using a gummy stone?) and any test to know you got the edges all sharp and ready for ice?

tips on waxing would be appriciated as well. i haven't gotten an iron yet, is it really necessary to get an iron that is non-steam? since those are rare to find these days...and i don't want to spend like $40 for an iron that i am going to melt wax with. thanks
Nov 15 2005 11:11PM
0 0
profile picture
Flynn
Posts: 1174 - Karma: 10
www.tognar.com

The tips section there is generaly pretty good stuff, far better than what most will tell you here.
Nov 15 2005 11:12PM
0 0
profile picture
S.Harkins
Posts: 645 - Karma: 373
people on ns tune their skis? i didnt know
Nov 15 2005 11:16PM
0 0
profile picture
acoustikrage
Posts: 1001 - Karma: 10
this might be helpful.
http://www.tetongravity.com/forums/showthread.php?t=5528&highlight=tuning
Nov 15 2005 11:27PM
0 0
profile picture
-_-
Posts: 574 - Karma: 10
^that was a good thread, thanks bud
Nov 15 2005 11:37PM
0 0
profile picture
godz
Posts: 16 - Karma: 10
To make sure that you are sharpening the whole edge, use a felt marker and make little ticks across the edge. That way, you know how much of your edge is getting sharpened. If you are doing rails, don't sharpen the underfoot of the ski at all.

and as for waxing, don't stop moving the iron, you can melt your base. And just hot enough to melt the wax, if there is smoke, it's way too hot.

i've maybe tuned my skis three or four times since i've quit racing (which was 4 years ago).
Nov 17 2005 4:05PM
0 0
All times are Eastern (-5)