Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

What to put on my rail?

profile picture
ct
Posts: 2076 - Karma: 99
I just built a 36 foot Flat-down-flat rail and have no idea what to put on top of it. It's 5 1/2 inches wide. Keep under 50$
Nov 12 2005 2:31PM
0 0
profile picture
oakjewlery
Posts: 4905 - Karma: 32
pvc
Nov 12 2005 6:18PM
0 0
profile picture
joetyson
Posts: 901 - Karma: 51
yo no question if your on a buget pvc
Nov 12 2005 6:52PM
0 0
profile picture
Galin
Posts: 2342 - Karma: 3,940
http://www.usplastic.com/catalog/product.asp?catalog%5Fname=USPlastic&category%5Fname=72&product%5Fid=10369
go there, thats what im using for my rail. Mine's 4" wide and with that 1/4 " 2'x4' it makes 24 feet of rail. You might have to get like 3 sheets though which'll be like 80 with shipping.
Nov 12 2005 9:19PM
0 0
profile picture
ct
Posts: 2076 - Karma: 99
that stuff it too expensive
Nov 13 2005 1:26PM
0 0
profile picture
Galin
Posts: 2342 - Karma: 3,940
for you i guess but if you made the rail 4" wide it would work really good and fairly cheap. I dont think you're gunna find anything that'll work good for that long and wide of a rail thats gunna be under $50. If you somehow do find something, please tell me.
Nov 13 2005 1:56PM
0 0
profile picture
ct
Posts: 2076 - Karma: 99
i think im gonna use this coping stuff i found at home depot im not sure if it'll work tho cuz its aluminum
Nov 13 2005 2:14PM
0 0
profile picture
xnoresponse
Posts: 946 - Karma: 10
dont use aluminum..its to soft and you will catch
Nov 13 2005 3:02PM
0 0
profile picture
Galin
Posts: 2342 - Karma: 3,940
isnt alluminum more expensive than steel too...?
Nov 13 2005 3:04PM
0 0
profile picture
ct
Posts: 2076 - Karma: 99
i already bought some to test it was 5$
Nov 13 2005 5:43PM
0 0
profile picture
Skipig25
Posts: 10729 - Karma: 256
aluminum doesn't work well. trust me on this one
Nov 13 2005 7:22PM
0 0
profile picture
oakjewlery
Posts: 4905 - Karma: 32
yeah unless you have skis with no edges
Nov 14 2005 8:09PM
0 0
profile picture
ct
Posts: 2076 - Karma: 99
yea the aluminum isnt gonna work unless i dull my edges which i might but anyone else have other ideas? that are cheap
Nov 15 2005 6:18PM
0 0
profile picture
BigJew
Posts: 6974 - Karma: 79
PVC pipe.PVC pipe, it comes in pipes of 10ft long and they're 9$ a piece for me.
Nov 15 2005 6:35PM
0 0
profile picture
Galin
Posts: 2342 - Karma: 3,940
really? for how thick? At my home depot its $1.50 for 10 feet of 1/2"
Nov 15 2005 7:10PM
0 0
profile picture
Davevinc1080
Posts: 723 - Karma: 10
50 is pretty cheap, you will have to use pvc for taht much
Nov 15 2005 7:12PM
0 0
profile picture
ct
Posts: 2076 - Karma: 99
i might go with the pvc even tho i dont think it will be very good
Nov 15 2005 7:33PM
0 0
profile picture
BigJew
Posts: 6974 - Karma: 79
The stuff we got is almost 1/2 inch thick. It's burly!! PVC will crack when it's thin or when it's really cold out (-35oC)
Nov 15 2005 10:48PM
0 0
profile picture
ct
Posts: 2076 - Karma: 99
now im thinking about putting metal flashing on it but there would be a 1/4 inch overlap on each side. you think that'd matter?
Nov 16 2005 3:55PM
0 0
profile picture
Skipig25
Posts: 10729 - Karma: 256
fold it down with a mallet after it's on
Nov 16 2005 5:13PM
0 0
profile picture
Frostfired
Posts: 3090 - Karma: 35
12ft pvc with 1.5 or 2inch diameter (not sure which) for 7$
Nov 17 2005 12:08AM
0 0
profile picture
treesmann
Posts: 2675 - Karma: 49
i wouldnt use wide pipes b/c they will be easier to crack, i think
Nov 17 2005 7:20AM
0 0
profile picture
ct
Posts: 2076 - Karma: 99
heres a tip:DO NOT USE ALUMINUM
Nov 27 2005 12:57PM
0 0
profile picture
Kal-El
Posts: 80 - Karma: 13
post a pic of ur rail, how much did it cost u?
Nov 27 2005 1:06PM
0 0
All times are Eastern (-5)