RAB Outerwear Giveaway

Member of the Month

Dlonetti
August, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

LIne reactors

profile picture
ben_southworth
Posts: 1063 - Karma: 447
i was gonna get sdome line skis this year, but i heard that you can only use line bindings with them...
so are the line bindings good? cause 200$ is pretty expensive...
Oct 8 2005 12:40AM
0 0
profile picture
Jeff_Lo
Posts: 5809 - Karma: 263
haha u dont have to..but id reccomend it! they work great with line skis, its worth the cost of it man! saves your knee and holds you in great!
Oct 8 2005 12:59AM
0 0
profile picture
KeegLove
Posts: 10166 - Karma: 55
you dont have to use line bindings for them and line reactors have had some badd reviews i hae never used them myself but my friend broke 2 pairs in one season
Oct 8 2005 1:00AM
0 0
profile picture
Rich
Posts: 921 - Karma: 11
and it means you don't have to drill holes into your skis
Oct 8 2005 1:01AM
0 0
profile picture
jflo453
Posts: 1383 - Karma: 26
yea if ur not using reactors youll have to drill ur own holes or have a shop do it, alot of skis are this way, they only fit the company bindings, reactors aer sweet though
Oct 8 2005 1:01AM
0 0
profile picture
skimeehan
Posts: 181 - Karma: 21
you dont have to use line bindings with line skis. they are a great binding so i would. plus if you get line skis again next year you dont have to get new bindings because you can just switch them over. its a win win situation.

word
Oct 8 2005 1:02AM
0 0
profile picture
Jeff_Lo
Posts: 5809 - Karma: 263
good for your friend, i never broke a pair, the pair probably broke cuz he was tampering with them, or the shop didnt set them up right....id still rather break a binding than my knee
Oct 8 2005 1:07AM
0 0
profile picture
mattster
Posts: 4120 - Karma: 41
line bindings scare me... ill wait till they get all the kinks worked out...
Oct 8 2005 5:57AM
0 0
profile picture
Inthefridge
Posts: 207 - Karma: 15
I think theyve got too much lift on them and the extra weights a bit shit.
Oct 8 2005 6:18AM
0 0
profile picture
RichardCranium
Posts: 127 - Karma: 10
Once i saw line bindings LITERALLY fall apart on the first turn on them. then the ski went 2o or 3o feet into the woods. that is my experience with them they are nothing but trub in my eyes. they could be good though it just depends who knows im not talking poop on them or anything just personal exp.
Oct 8 2005 6:22AM
0 0
profile picture
evaroni
Posts: 3895 - Karma: 3,774
im curious i do want to try them and put them on one of the titanium carvng skis to see how they handle throwing down a mach carve....scare me in the park tho
Oct 8 2005 8:56AM
0 0
profile picture
Subjekt
Posts: 1431 - Karma: 12
remember line did put them thru r and d, so stories like fallin apart on the first turn are hard to believe, no offense. ive never ridden them but i ordered a pair for my invaders this yr, ihope they hope up, last yr i was on tyrolias and whenever i landed switch my right brake would catch, rip my ski off, and bend like hell, needless to say it was quite annoying, but taught me to land switch at a perfect angle as not to fuck up my skeez.
Oct 8 2005 9:25AM
0 0
profile picture
Rich
Posts: 921 - Karma: 11
actually dude although the problem has been totally blown out of proportion by shit-talkers on this site. My 1st pair broke in the first hour I used them, and yes they were totally set up properly, and no I hadn't fucked around with them...toe piece cracked and was just hanging on to the binding. Luckily Line UK is amazing and within 3 days I had a new pair on my pollards. I've ridden the shit out of those and they still work great. You couldn't pay me to change them.

Anyone who complains about the extra weight is a pussy: the only time you notice that is when you're carrying them.
Oct 9 2005 12:31PM
0 0
profile picture
jetski
Posts: 375 - Karma: 10
You hear this a lot. Line bindings won't be around in a couple of years because everyone says to wait a few years. I for one will support the quickmount system. Do they have some problems? Yes. Do I have a back up pair of sticks with different bindings ? Yes. Will I break another pair? Probably. I have lots of skis so I can afford to support the binding. The reactor may not be for everyone but it suits me fine.
Oct 9 2005 1:22PM
0 0
profile picture
InfernoHits
Posts: 4755 - Karma: 192
is it a heavy binding
Oct 9 2005 1:24PM
0 0
profile picture
UTskier
Posts: 743 - Karma: 158
I watched the Reactors give my friend endless trouble on his vacation out here in Utah. They were new, mounted on Line skis. They were constantly pre-releasing on him no matter the DIN setting, and then little parts broke off. He had to spend all day going from shop to shop because no one would work on them. There's a cult called Exploding Reactors on here I think... Like someone else said, buy them if you have $350 to spend on bindings that you know have serious problems... These things have given so many people trouble, and still everybody feels the need to defend them because Line "put so much into it". No one else is going to adapt this four screw platform, it's heavy as hell and just doesn't make much sense. The ACL saving stuff is great as long as you don't have a broken skull from pre-releasing headfirst into a tree.
Oct 9 2005 3:08PM
0 0
profile picture
twix_182
Posts: 9248 - Karma: 27
of course u wouldnt be going straight on with a tree in the first place
Oct 9 2005 3:18PM
0 0
profile picture
powderdream
Posts: 1112 - Karma: 12
i have them and love them, no problems for me
Oct 9 2005 4:37PM
0 0
profile picture
cork5_thovex
Posts: 1068 - Karma: 8
i just got my reactors and put them on my mike nicks, a fully brand new set up this year i am so happy. they better not be how everybody is saying they are. I am gonna be pissed if they are. but they should be good. they save money from getting them mounted at a shop. and it only took about 5 mins.
Oct 9 2005 4:41PM
0 0
profile picture
Tha_Grouch
Posts: 2216 - Karma: 14
Well your shop obviously doesn't know how to set them correctly... especially if you broke EVERY pair. haha.. that is so so rediculous.
Oct 9 2005 4:45PM
0 0
profile picture
genisess2
Posts: 20 - Karma: 10
i have heard many mixed reviews about the bindings and from what it seems is the people who break them are the ones who set them up themselvs. i orderd a pair for my invaders and im gonna let a shop set them up
Nov 4 2005 10:01AM
0 0
profile picture
Aseets
Posts: 2171 - Karma: 17
I'm a little nervous about having my local shop set up my reactors, cause as of last spring they didn't sell 1 single pair of reactors, but hopefully they will set them up properly.
Nov 4 2005 10:52AM
0 0
profile picture
Aseets
Posts: 2171 - Karma: 17
Of the poeple who broke their reactors, which did you have? 10 or 12 Perhaps there is a correlation with broken bindings and which model they were?
Nov 4 2005 11:05AM
0 0
profile picture
jetski
Posts: 375 - Karma: 10
same binding, different din settings.
Nov 4 2005 11:06AM
0 0
profile picture
Tha_Grouch
Posts: 2216 - Karma: 14
ok..even if they were to break on you, LINE has the best warranty out there... A NO QUESTIONS ASKED WARRANTY. thats on skis and bindings. How could you be unhappy with that? Line bindings are the shit. I would never go back to LOOKS and their skis are pimp as hell too.
Nov 4 2005 12:48PM
0 0
profile picture
Aseets
Posts: 2171 - Karma: 17
i know that. But what if, what if?
Nov 4 2005 1:54PM
0 0
All times are Eastern (-4)