Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

HElP, what do i do?

profile picture
*
Posts: 178 - Karma: 10
What the hell do i do, i'v got this dope 28 ft kink, with an inrun off my roof but its made out of 2x4s, I can't afford meatal, I'd like to use the special paint but i have no idea what its called or if i can even apply it in the cold, if anyone can tell me or give another suggeustion i'm all ears.
Oct 29 2002 5:36PM
0 0
profile picture
wolfmansbro
Posts: 2155 - Karma: 137
I wouldnt paint it or do anything to the wood. It will rot but all you can do is replace the wood when it starts to rot. If you paint it or put some type of sealer on it when u start to grind on the wood the paint will just come off with the edges. Also if you paint it some of the paint chips might come off and get into the base.
Oct 29 2002 5:42PM
0 0
profile picture
*
Posts: 178 - Karma: 10
i know for a fact you can't slid on wood after you'v torn it up, wood blows. I also know that their is a paint that will not chip, someone must know. HELP
Oct 29 2002 5:47PM
0 0
profile picture
GrippinGs
Posts: 4960 - Karma: 196
u can be poor as hell and still get metal..just steal it. if ur desperate enuff u'll find a way
Oct 29 2002 6:00PM
0 0
profile picture
Ds91260
Posts: 9984 - Karma: 19
hey stealings bad.


well someone had to say it
Oct 29 2002 6:05PM
0 0
profile picture
GrippinGs
Posts: 4960 - Karma: 196
only if u get caught
Oct 29 2002 6:07PM
0 0
profile picture
alpentalik
Posts: 7364 - Karma: 110
rip the edges off your skis and then sell them and buy some pvc conduit


''There's no fruit on the tree without the roots.''
Oct 29 2002 6:16PM
0 0
profile picture
wolfmansbro
Posts: 2155 - Karma: 137
Sounds like if there is a paint out there that will not chip that it will be expensive too. Wont it be like cheaper and less of a hassel to just get metal pipes insead of dealing with wood and painting
Oct 29 2002 6:25PM
0 0
profile picture
BiGaIr1440
Posts: 361 - Karma: 11
last time i tried to slide wood my edges got caught and i wrecked so bad. I preffer to slide metal or PVC pipes just cause i had a bad expierence with wood
- - - - - - - - - - - - - - - - - - -

Is it cheating if the girl is from another country?

Some one please help !!!
Oct 29 2002 8:17PM
0 0
profile picture
skia123
Posts: 429 - Karma: 11
Just like drill PVC pipe onto the top of it with screws
Oct 29 2002 8:50PM
0 0
profile picture
Almost
Posts: 417 - Karma: 10
you can get scrap metal pretty easily if you really decide to look for it.. otherwise look for some remodels on houses that include piping.. you can swipe pretty big pieces of PVC from renovators
Oct 29 2002 11:18PM
0 0
profile picture
quebecfreestyler
Posts: 13040 - Karma: 1,419
put some soap on it
Val d'Irene represent!!!!!!!!!!
NS media fo ever!!!!
'believe me- when you ski like timboskier- you have every right to be cocky. the kid throws cork 12s and double lincoln grabs'- zachd
Proud member of the resurrected PPP
Oct 29 2002 11:21PM
0 0
profile picture
schlonginator
Posts: 3971 - Karma: 27
i'm for stealing a rail - just suss out a nice hand rail at you local mall carpark or similar. Then in the middle of the night you come with an angle grinder - grind through the bases of the hand rail, load it on your truck and off you go!! You'll then have a bullet proof industrail quality rail !!!





======================
Pikachu is a homosexual
Oct 29 2002 11:34PM
0 0
profile picture
Beanie**
Posts: 59 - Karma: 10
Improv..... somthing always works.,....
www.longhairproductions.cjb.net

EC-WC its all good--
Oct 30 2002 9:26AM
0 0
profile picture
GrippinGs
Posts: 4960 - Karma: 196
if worse comes to worse then u can just work on ur 50-50's cuz u won't be able to do regular slides
Oct 30 2002 4:15PM
0 0
profile picture
Capt.Flannel
Posts: 10928 - Karma: 36
You could cover the top of the wood with plexiglass. that might work, and its proly cheaper than metal.
Oct 30 2002 5:31PM
0 0
profile picture
Mashed_Penguin_NZ
Posts: 195 - Karma: 10
Tried a scrap metal dealer?



Freshies for a week after a dump? Temple Basin - Hell Yeah!
Oct 30 2002 5:35PM
0 0
profile picture
GrippinGs
Posts: 4960 - Karma: 196
has anyone ever tried plexi-glass? does it work?
Oct 30 2002 7:08PM
0 0
profile picture
Capt.Flannel
Posts: 10928 - Karma: 36
This winter thats what im plannin to use. im gona build a double kink frame out of wood, and then put a strip of plexiglass on top. ill report back in once i try it. waherd-Sam
Oct 30 2002 7:09PM
0 0
profile picture
candideskier9
Posts: 59 - Karma: 10
just go to home depot or something and get some pvc its cheap




unconstitutionalistacally
Oct 30 2002 7:12PM
0 0
profile picture
buffalo6
Posts: 49 - Karma: 10
metal is cheap, i bought a 10 foot piece that fit perfectly onto a 2X4, square metal, for 2$
Oct 30 2002 7:33PM
0 0
profile picture
AlpineShopVT
Posts: 381 - Karma: 11
buy some angle iron at a hardware store its pretty cheap. or if you can go to a junkyard you can take peices of old bed frames.. that stuff works pretty good. ive used it for boxs for skating.. try that.
Oct 30 2002 8:04PM
0 0
profile picture
lineskier321
Posts: 1425 - Karma: 22
pvc is really cheap. you could get that. plus i think its a bit easier to grind then metal

Too high? You fucking pussy. - ski2824

Why is the name of the fear of long words
Hippopotomonstrosesquippedaliophobia?

Oct 30 2002 8:20PM
0 0
profile picture
skifreak915
Posts: 659 - Karma: 12
Yeah I bought a 4 by 10 piece of wood and then I found this metal 4 by 10 sheeting that fits right onto the wood, I just have to drill the sides into the wood. The metal seems like it will hold up. I got it all for like 4 bucks at Home Depo. Im going to build this sweet kinked rail soon after I get another piece. Good Luck!
Oct 30 2002 9:03PM
0 0
All times are Eastern (-5)