Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Line quick mount problem

profile picture
FUUUCK
Posts: 18426 - Karma: 4,888
i bought a brand new pair of 03- 04 line 1260s from evogear on ebay and one ski has the pre drilled holes with the rivets for the line binding but the other ski doesnt, it never said this on the web page and i was wondering if theres a way to get the rivets installed on the other ski

________________________________________



I really wonder about the mental abilities of people who have nothing better to do than swear at a computer program...-gregg
May 4 2005 11:04AM
0 0
profile picture
Riley.
Posts: 2214 - Karma: 259
thats f-d up, Id return em unless it said that in the description and you still bought em. in that case, your screwed. Or you can just not use the reactors.

Be alive today.~MARLEY
May 4 2005 11:06AM
0 0
profile picture
MLB
Posts: 4462 - Karma: 298
Unless you have many huge industrial machines , your SOL. Just don' use the reactors.




Matman10: Man lat you had that 7 down but you binder poped off
Laterails:Yeah i think they aren't adjusted, or it could be the fact that all that is holding them together is one of my pubes
May 4 2005 11:10AM
0 0
profile picture
FUUUCK
Posts: 18426 - Karma: 4,888
according to my moms boyfriend whos a contractor you can buy the inserts at the home depot and just drill 4 holes and screw them in

________________________________________



I really wonder about the mental abilities of people who have nothing better to do than swear at a computer program...-gregg
May 4 2005 11:16AM
0 0
profile picture
FUUUCK
Posts: 18426 - Karma: 4,888
i mean those inserts cant be used exclusively by line can they?

________________________________________



I really wonder about the mental abilities of people who have nothing better to do than swear at a computer program...-gregg
May 4 2005 11:29AM
0 0
profile picture
Condor1472
Posts: 51 - Karma: 10
I thnk its better just use the reactors so you dont screw with ur skis



'Proud Member of the NS Praetorian Guard

Viva La Praetorian Bitches'
May 4 2005 11:42AM
0 0
profile picture
FUUUCK
Posts: 18426 - Karma: 4,888
^thats just the problem, i can only use the reactors on one ski

________________________________________



I really wonder about the mental abilities of people who have nothing better to do than swear at a computer program...-gregg
May 4 2005 11:50AM
0 0
profile picture
hendrik.
Posts: 6715 - Karma: 267
contact dealer, then email line if they dont care. I'm sure they'd be happy to do it for you so that you could used THEIR product...

_______________________________________



Just ski.
May 4 2005 11:55AM
0 0
profile picture
DANETRON
Posts: 6671 - Karma: 137
dont try to put those rivets in your self the ones that come with the skis have a washer like thing anchors them down and prevents them from ripping out. i bought the same 12s from evogear and mine are fine. make evogear fix there fuck up or try sending them to line

My pokemon brings all the nerds to the yard. And they're like, "You wanna trade cards?" Damn right, I wanna trade cards. I'll trade this, but not my charizard.

"I took the bullets outa fifty and put them in my fo five"

LINE kicks ass

May 4 2005 11:59AM
0 0
profile picture
DANETRON
Posts: 6671 - Karma: 137
plus contractors know nothing about how skis work, so dont listen to them

My pokemon brings all the nerds to the yard. And they're like, "You wanna trade cards?" Damn right, I wanna trade cards. I'll trade this, but not my charizard.

"I took the bullets outa fifty and put them in my fo five"

LINE kicks ass

May 4 2005 12:01PM
0 0
profile picture
Bangor
Posts: 9599 - Karma: 129
yeah, putting your own inserts in won't work. they'll rip out.

line builds the inserts into the core, instead of drilling them in after......... so you're fucked if you can't get it warrantyed/problem resolved.

______________________
- Ian
May 4 2005 12:06PM
0 0
profile picture
Vicious
Posts: 3862 - Karma: 140
DO NOT try to make your own inserts. either call evogear and tell them to give you a different ski so both have holes or call line and see if they'll help you out. last resort, just use binders other than reaactors.


-Ski CO-

Jibij Pro Shop
www.jibij.com
May 4 2005 12:08PM
0 0
profile picture
FUUUCK
Posts: 18426 - Karma: 4,888
dont worry i wasnt planning on putting in the rivets myself, i just thought that maybe one option was to get a shop to install them

________________________________________



I really wonder about the mental abilities of people who have nothing better to do than swear at a computer program...-gregg
May 4 2005 12:20PM
0 0
profile picture
Deezl
Posts: 2112 - Karma: 8
A lot of times with the older line skis, the inserts are in the ski under the topsheet but haven't been drilled. Before the reactors were out, I think you had the option of ordering inserted or non inserted skis.

A friend of mine has Skogens from 03-04 and you can definitely see the inserts in there even though they aren't drilled.

If evogear won't help you out, check your skis and see if you can find the inserts. If they are there call line and see if they can help you by drilling them for you.

May 4 2005 1:18PM
0 0
profile picture
Hctiws_iks
Posts: 2077 - Karma: 25
as a last resort you could always learn how to ski on just one ski,

or use ducttape

_____________________
I hate NY productions

Bogart!
May 4 2005 1:24PM
0 0
profile picture
Rom
Posts: 193 - Karma: 10
Contacting Evogear is your best bet, they should help you out

May 4 2005 1:26PM
0 0
profile picture
FelixRioux
Posts: 372 - Karma: 1,754
look at the serial number on your skis, if they do not match you need to call whoever sold them to you and get the matching pair...

D-Rocks!
May 4 2005 1:30PM
0 0
profile picture
lineskier07
Posts: 331 - Karma: 10
^ exactly what he said you probably got a miss match you should always check serial numbers

May 4 2005 2:36PM
0 0
All times are Eastern (-5)