Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
Need help building a wallride
Posts: 1642
-
Karma: 103
this is for my yard, plans would be best, but like what height/angle should it be, how do i support it, ect... any help would be great
Posts: 8345
-
Karma: 25
how much speed do you have cow boy?
Posts: 1642
-
Karma: 103
its for the winter, plenty
Posts: 2228
-
Karma: 317
i have found the easiest way is to have the plow guy make a big pile of snow. then carve one side flat, build ur wall ride on that, have it extend above to pile of snow. doubles as a qp
Posts: 4904
-
Karma: 568
just build a framed peice pf plywood
i.e use 2x4s and line the edges and just make it stonger then prop it up
Posts: 4801
-
Karma: 868
we nailed a 2x4 between two trees, and then we just nailed three 4x10ft (yeah i know theyre normaly 8 ft) pieces of ply wood verticaly from that 2x4. Also see if you can find a spot that is like a valley so the hill goes down and then up again and the wall is at the beginning of the up. That way the wall seems taller and it uses alot less snow. it worked real well for us. We just stalled and spun up onto the top we didnt slide the top like a regular wall but we didnt need to cover the ply wood with anything either and it slid fine. try and make the angle between 45 and 90 when your setting it up its reall obvious what angle will work best.
All times are Eastern (-5)
