Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Building summer set up

profile picture
Gummy
Posts: 231 - Karma: 17
So I'm thinking of building a summer setup rail and need some advice.
What materials u use for the rail section (what kind of pipe??). And how much it's gonna cost.
How high the speeding tower (sorry my english, but you get the point)
Thanks for all responses in advance :)
Apr 19 2009 1:29PM
0 0
profile picture
NaturalRotater
Posts: 433 - Karma: 36
if you build a box go buy some puck board.
Apr 19 2009 1:42PM
0 0
profile picture
Shewlur...
Posts: 5046 - Karma: 940
use pvs pipe
like $3 for one
Apr 19 2009 2:04PM
0 0
profile picture
AcePerry
Posts: 258 - Karma: 152
build a frame like thing with legs and a 2b by 4 on the top screw down some PVC for ur rail

drop in depends on how big of a hill you have
Apr 19 2009 2:09PM
0 0
profile picture
Gummy
Posts: 231 - Karma: 17
Thanks for the advice already given :)
I'd like to know what material I should use for ''carpet''. What material slides well enough?? Is fake grass good enough?
Keep good tips coming :)
Apr 19 2009 2:31PM
0 0
profile picture
Malcolm
Posts: 15949 - Karma: 9,429
also this cult https://newschoolers.com/web/content/viewcult/action/view/id/453/
I'm reading as much as i can from it so i don't mess up my summer set up. It's got info on pretty much everything
Apr 19 2009 2:50PM
0 0
profile picture
.oz.
Posts: 743 - Karma: 40
about four feet for hte drop in ramp is usually enough, i recommend astro turf (fake grass), just water it down and put some soap and it works nicely, then for the rail definetely use pvc pipe, its cheap, slides well, durable and if it does break it's easy to replace. good luck
Apr 19 2009 2:59PM
0 0
profile picture
geet
Posts: 2436 - Karma: 6
https://newschoolers.com/web/content/viewcult/action/view/id/453/
Apr 19 2009 3:12PM
0 0
profile picture
Aznavalanche
Posts: 481 - Karma: 12
for the material on the drop in, i'd go with some plastic lattice, then for the tranny some outdoor carpet for control/ speed check. and for the rail, whatever u can find for cheap or free. I got some metal pipes for free from my dad's work, but otherwise, i would have gone with pvc.
When I built my box, i did a frame kinda like this:

Click for larger image

on the top i put uhmw, but u could go with hdpe (both r expensive and if u wann make a box out of pvc use the same basic frame as the rail below, just wider...) and for the copin i used pvc rails

and the rail, like this:

(This is not me, but i build mine almost the same)
Click for larger image

^maybe make it taller though



Apr 19 2009 3:16PM
0 0
profile picture
Shewlur...
Posts: 5046 - Karma: 940
sry *pvc pipe
Apr 19 2009 3:30PM
0 0
profile picture
Gummy
Posts: 231 - Karma: 17
Thnx for all responses they REALLY helped me out. I'm gonna do the setup with my dad, who is really good with his hands. Gonna send some pics when am done :)
Apr 19 2009 3:48PM
0 0
profile picture
EAST~COAST
Posts: 1017 - Karma: 91
for the carpet id use snowgel, its meant for stuff like this and it wont ruin your skis, you just put it on a carpet and go. go to www.snowgel.com
Apr 22 2009 6:12PM
0 0
profile picture
.oz.
Posts: 743 - Karma: 40
only problem with snowgel is that it is super expensive if you plan on using it everytime you sesh. the most economical and best quality for price would have to be simply soap and water
Apr 23 2009 5:15PM
0 0
All times are Eastern (-4)