Online
Answering to binding adju - Gear Talk - Forums
<-- Back to thread listing
I do some shop work and mount/set everything of mine, but hey, I know what I'm doing and have access to the equipment.
And I can say that "close" is relative, and sometimes it does count. Setup is not a perfect science, it's a close-as-you-can-get kind of thing. And really, most DIN settings have a small margin of error.
Someone who gives advice on here is not going to be liable because for starters someone would have a hard time getting your actual name and where you live from the website. The fact that the website is based in Canada would make it virtually impossible for some american to try and sue you as well because they couldn't force the website to provide your details.
So in the end your example is stupid.
I hope you are joking.
The internet is not anonymous. And yes it is very easy for anyone to find out your info.
And unless they get it legally they cant use it.
Believe me, the internet is no longer anonymous and if someone wrecks themselves because of advice you give, you can be held accountable should that person choose to come after you. There are things called court orders that can force a company to turn over personal information in a legal case.
1) even if you are certified, DON'T GIVE INFORMATION
2) don't be cheap! have your local shop adjust your bindings!
stop whining!
that is probably the worst possible advice i've heard. if you keep popping out, go see your local shop because there's a good chance that the forward pressure is not set properly on the bindings. if you keep dialing up the DIN, you're going to break a leg.
The reason there is a DIN chart is for that very reason.
The way you ski can have an effect, but not much.
The DIN is for the release value...which doesn't vary, it will take the same amount of force to release a DIN @ 10 while racing as it will while doing bumps, or back country or whatever...what will change is how much tension you need to hold you in properly....and release you properly.
what ever the din is set to, to your boot size/height/weight is how much weight( i believe in lbs/foot or somthing like that), is constant. when you change the din you change the amount of force it takes to release. obviously alot of these "shop guys" don't torque test or they would know this kind of info.
Ok, so basically you're still wrong. All you've done is say that: "i did not say that your din releases you differently when your doing other things but yes i am saying that you might want to crank it up at times in order to insure not coming out" which essentially means that if you don't want your bindings to release you(which is most definitely less than safe in almost all situations) then you should increase your DIN, which everyone in here already knows.
DIN is a standard and it's constant. It doesn't release differently, etc. The only thing that will change is how much force you might want or need to hold you in, which is exactly what I said before.
If it does, then after 13 years riding, you should feel ok adjusting them by .5 in either direction to compensate.
And lastly, try World Cup, they have far better techs, etc.
Also, How to calculate (when you buy used skis) if the holes already made will fit your bindings....
Ohkay, let's say i want to buy some 176 Trouble Makers mounted 308 BSL and fit my 120 FKS binding on it. I'd like it to be center mounted and my sole length is 315 mm. IS IT POSSIBLE !!!!!!?
I'd be very grateful for a decent answer
The BSL just means that is the boot sole length they were mounted to fit at the line for. Pretty simple.
Your question about fitting other boots depends on the bindings, FKS clamps have a very small margin of adjustment (I want to say 2mm in either direction, but don't quote me on that, cause I could be off), so in order to be able to fit without remounting, your boot would need to be in the range of adjustment for the particular binding in question.
Also consider that even if your boot does fit (which I'm guessing it won't in this situation, but most bindings have a lot more adjustment than FKS), depending on how much you adjust to fit your boot, it also moves the midsole line accordingly, so if you adjust the bindings 10mm back to let your bigger boot fit in for example, you just moved the line back 10mm from center.
<-- Back to thread listing - Previous Page
Subject: Answering to binding adjustment question: the memo
Ok I,ll make it short and clear: if you are not a certified shop tech or know exactly waht you are talking about, dont anser to any of the binding adjustment questions.
If you lead someone in the wrong direction, you may be responsible for screwing hisknees and maybe other parts of his body big time.
Cedric Tremblay-Fournier
ok sorry, 4 and half.
I'm gonna have to give my 2 cents on this one.
First off, I'm going to give you my brief background. 5+ years working at an on mtn shop, 4 + years with Rossignol Ski Co. (not a claim, I'm just give you my background in the industry)
Binding adjustment should be left to a Certified Tech. Anyone giving out ANY information on how to setup bindings of NS is completely retarded. Seriously. You don’t know what your risking by advising someone on a indicator setting, or how to adjust forward pressure.
Binding company’s such as Rossi/Look/Roxy, or Salomon/Atomic, or Marker, have full time lawyers who have to deal with settlements with bindings, more then you think. They (read manufacture) will back up a Certified Tech, being that they understand and have taken a test on how the certain bindings work. But they wont back your ass up on giving advice over NS.
Lets give a quick example. Say Joe shop guy ( a certified tech) sets a customers skis. The customer, goes skiing, hits a jump, and for whatever reason blows out or doesn’t blow out of his bindings, causing himself to blow his knee. The custy, then tries to sue the shop for setting up the bindings improperly, which is when lawyers will get involved, and more then likely the manufacture of the binding will back up the tech.
Now, same example, but replace "JOE SHOP GUY" with "Dumbass Newschooler.com user" Your not a tech, you don’t know how to properly adjust a binding, and you advise on how to setup a binding to someone over NS. They bust themselves, and you are left liable for what you suggested on setup, which can royally fuck you over (read mega lawsuit).
Even a Certified Tech should not give out information over the Web/NS. To properly setup a bindings, you need to perform a visual test of the products given, Boot, binding, and ski. You cant see they quality of a product over the web, so insist someone brings the skis into a shop to get them adjusted.
Trust me when I say this: DO NOT ADVISE ON BINDING SETUP OVER NS. Leave it to someone who knows what there doing. Do not attempt to adjust bindings yourself. When adjusting bindings, "close" doesn’t count. Close only counts in horseshoes and hand grenades. Not with adjusting bindings.
_______________________________________________________________
At the time of this post on www.newschoolers.com , vtrider or anyone using vtrider's login could be under the influence of drugs or alcohol, and cannot be found responsible for words spoken, images, or links posted.
www.rossignol.com
www.smithoptics.com
At the time of this post on www.newschoolers.com , vtrider or anyone using vtrider's login could be under the influence of drugs or alcohol, and cannot be found responsible for words spoken, images, or links posted.
www.rossignol.com
www.smithoptics.com
Quoting vtrider$$ from May 26 2008 7:56:00:
I'm gonna have to give my 2 cents on this one.
First off, I'm going to give you my brief background. 5+ years working at an on mtn shop, 4 + years with Rossignol Ski Co. (not a claim, I'm just give you my background in the industry)
Binding adjustment should be left to a Certified Tech. Anyone giving out ANY information on how to setup bindings of NS is completely retarded. Seriously. You don’t know what your risking by advising someone on a indicator setting, or how to adjust forward pressure.
Binding company’s such as Rossi/Look/Roxy, or Salomon/Atomic, or Marker, have full time lawyers who have to deal with settlements with bindings, more then you think. They (read manufacture) will back up a Certified Tech, being that they understand and have taken a test on how the certain bindings work. But they wont back your ass up on giving advice over NS.
Lets give a quick example. Say Joe shop guy ( a certified tech) sets a customers skis. The customer, goes skiing, hits a jump, and for whatever reason blows out or doesn’t blow out of his bindings, causing himself to blow his knee. The custy, then tries to sue the shop for setting up the bindings improperly, which is when lawyers will get involved, and more then likely the manufacture of the binding will back up the tech.
Now, same example, but replace "JOE SHOP GUY" with "Dumbass Newschooler.com user" Your not a tech, you don’t know how to properly adjust a binding, and you advise on how to setup a binding to someone over NS. They bust themselves, and you are left liable for what you suggested on setup, which can royally fuck you over (read mega lawsuit).
Even a Certified Tech should not give out information over the Web/NS. To properly setup a bindings, you need to perform a visual test of the products given, Boot, binding, and ski. You cant see they quality of a product over the web, so insist someone brings the skis into a shop to get them adjusted.
Trust me when I say this: DO NOT ADVISE ON BINDING SETUP OVER NS. Leave it to someone who knows what there doing. Do not attempt to adjust bindings yourself. When adjusting bindings, "close" doesn’t count. Close only counts in horseshoes and hand grenades. Not with adjusting bindings.
I agree with the fact that people who don't know anything should have their equipment and set and tested by a certified tech, but as far as liability goes...I think any advice given over the interweb should at the very least be taken with a grain of salt, and falls under the "use this at your own risk, if you eff yourself up, it's your own fault cause you adjusted the bindings, not me" clause.
I'm gonna have to give my 2 cents on this one.
First off, I'm going to give you my brief background. 5+ years working at an on mtn shop, 4 + years with Rossignol Ski Co. (not a claim, I'm just give you my background in the industry)
Binding adjustment should be left to a Certified Tech. Anyone giving out ANY information on how to setup bindings of NS is completely retarded. Seriously. You don’t know what your risking by advising someone on a indicator setting, or how to adjust forward pressure.
Binding company’s such as Rossi/Look/Roxy, or Salomon/Atomic, or Marker, have full time lawyers who have to deal with settlements with bindings, more then you think. They (read manufacture) will back up a Certified Tech, being that they understand and have taken a test on how the certain bindings work. But they wont back your ass up on giving advice over NS.
Lets give a quick example. Say Joe shop guy ( a certified tech) sets a customers skis. The customer, goes skiing, hits a jump, and for whatever reason blows out or doesn’t blow out of his bindings, causing himself to blow his knee. The custy, then tries to sue the shop for setting up the bindings improperly, which is when lawyers will get involved, and more then likely the manufacture of the binding will back up the tech.
Now, same example, but replace "JOE SHOP GUY" with "Dumbass Newschooler.com user" Your not a tech, you don’t know how to properly adjust a binding, and you advise on how to setup a binding to someone over NS. They bust themselves, and you are left liable for what you suggested on setup, which can royally fuck you over (read mega lawsuit).
Even a Certified Tech should not give out information over the Web/NS. To properly setup a bindings, you need to perform a visual test of the products given, Boot, binding, and ski. You cant see they quality of a product over the web, so insist someone brings the skis into a shop to get them adjusted.
Trust me when I say this: DO NOT ADVISE ON BINDING SETUP OVER NS. Leave it to someone who knows what there doing. Do not attempt to adjust bindings yourself. When adjusting bindings, "close" doesn’t count. Close only counts in horseshoes and hand grenades. Not with adjusting bindings.
I do some shop work and mount/set everything of mine, but hey, I know what I'm doing and have access to the equipment.
And I can say that "close" is relative, and sometimes it does count. Setup is not a perfect science, it's a close-as-you-can-get kind of thing. And really, most DIN settings have a small margin of error.
ON3P
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
Quoting vtrider$$ from May 26 2008 7:56:00:
Binding company’s such as Rossi/Look/Roxy, or Salomon/Atomic, or Marker, have full time lawyers who have to deal with settlements with bindings, more then you think. They (read manufacture) will back up a Certified Tech, being that they understand and have taken a test on how the certain bindings work. But they wont back your ass up on giving advice over NS.
Lets give a quick example. Say Joe shop guy ( a certified tech) sets a customers skis. The customer, goes skiing, hits a jump, and for whatever reason blows out or doesn’t blow out of his bindings, causing himself to blow his knee. The custy, then tries to sue the shop for setting up the bindings improperly, which is when lawyers will get involved, and more then likely the manufacture of the binding will back up the tech.
Now, same example, but replace "JOE SHOP GUY" with "Dumbass Newschooler.com user" Your not a tech, you don’t know how to properly adjust a binding, and you advise on how to setup a binding to someone over NS. They bust themselves, and you are left liable for what you suggested on setup, which can royally fuck you over (read mega lawsuit).
Even a Certified Tech should not give out information over the Web/NS. To properly setup a bindings, you need to perform a visual test of the products given, Boot, binding, and ski. You cant see they quality of a product over the web, so insist someone brings the skis into a shop to get them adjusted.
Trust me when I say this: DO NOT ADVISE ON BINDING SETUP OVER NS. Leave it to someone who knows what there doing. Do not attempt to adjust bindings yourself. When adjusting bindings, "close" doesn’t count. Close only counts in horseshoes and hand grenades. Not with adjusting bindings.
Of course a binding company isn't going to back up some random person who give advice on their product on the internet. Why the fuck would they? The only reason they back up certified techs is because if they didn't the shop wouldn't stock their bindings its a simple as that.Binding company’s such as Rossi/Look/Roxy, or Salomon/Atomic, or Marker, have full time lawyers who have to deal with settlements with bindings, more then you think. They (read manufacture) will back up a Certified Tech, being that they understand and have taken a test on how the certain bindings work. But they wont back your ass up on giving advice over NS.
Lets give a quick example. Say Joe shop guy ( a certified tech) sets a customers skis. The customer, goes skiing, hits a jump, and for whatever reason blows out or doesn’t blow out of his bindings, causing himself to blow his knee. The custy, then tries to sue the shop for setting up the bindings improperly, which is when lawyers will get involved, and more then likely the manufacture of the binding will back up the tech.
Now, same example, but replace "JOE SHOP GUY" with "Dumbass Newschooler.com user" Your not a tech, you don’t know how to properly adjust a binding, and you advise on how to setup a binding to someone over NS. They bust themselves, and you are left liable for what you suggested on setup, which can royally fuck you over (read mega lawsuit).
Even a Certified Tech should not give out information over the Web/NS. To properly setup a bindings, you need to perform a visual test of the products given, Boot, binding, and ski. You cant see they quality of a product over the web, so insist someone brings the skis into a shop to get them adjusted.
Trust me when I say this: DO NOT ADVISE ON BINDING SETUP OVER NS. Leave it to someone who knows what there doing. Do not attempt to adjust bindings yourself. When adjusting bindings, "close" doesn’t count. Close only counts in horseshoes and hand grenades. Not with adjusting bindings.
Someone who gives advice on here is not going to be liable because for starters someone would have a hard time getting your actual name and where you live from the website. The fact that the website is based in Canada would make it virtually impossible for some american to try and sue you as well because they couldn't force the website to provide your details.
So in the end your example is stupid.
Quoting *kiwiNZ* from May 26 2008 9:22:30:
Someone who gives advice on here is not going to be liable because for starters someone would have a hard time getting your actual name and where you live from the website. The fact that the website is based in Canada would make it virtually impossible for some american to try and sue you as well because they couldn't force the website to provide your details.
So in the end your example is stupid.
Are you kidding me?Someone who gives advice on here is not going to be liable because for starters someone would have a hard time getting your actual name and where you live from the website. The fact that the website is based in Canada would make it virtually impossible for some american to try and sue you as well because they couldn't force the website to provide your details.
So in the end your example is stupid.
I hope you are joking.
The internet is not anonymous. And yes it is very easy for anyone to find out your info.
Quoting EmbracedByLea...
from May 27 2008 11:25:42:
Are you kidding me?
I hope you are joking.
The internet is not anonymous. And yes it is very easy for anyone to find out your info.
Not legally its not! from May 27 2008 11:25:42:Are you kidding me?
I hope you are joking.
The internet is not anonymous. And yes it is very easy for anyone to find out your info.
And unless they get it legally they cant use it.
Im certified Head/ Tyrolia, salomon and Rossi
Kids in back seats cause accidents...Accidents in back seats cause kids
So Ced, What is your height Weight and sole length and where are your bindings set? We will assume you are a beginner! :P
_______________________________________________________________
Skier 1/2 Pipe 2010 Cult
Big Boulder Park Cult
The Over the Hill Gang
Skier 1/2 Pipe 2010 Cult
Big Boulder Park Cult
The Over the Hill Gang
I love how this thrad has turned into everyone claiming what binding certs. they have.
ON3P
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
I'm a certified tech for all manufactures and believe me you want your din set properly i'll take a pre release over an injury and i've had many
Quoting *kiwiNZ* from May 26 2008 9:22:30:
The fact that the website is based in Canada would make it virtually impossible for some american to try and sue you as well because they couldn't force the website to provide your details.
So in the end your example is stupid.
Well the office is in Montreal but the servers are in Texas making it even easier for American authorities to access all the information.The fact that the website is based in Canada would make it virtually impossible for some american to try and sue you as well because they couldn't force the website to provide your details.
So in the end your example is stupid.
Believe me, the internet is no longer anonymous and if someone wrecks themselves because of advice you give, you can be held accountable should that person choose to come after you. There are things called court orders that can force a company to turn over personal information in a legal case.
1) even if you are certified, DON'T GIVE INFORMATION
2) don't be cheap! have your local shop adjust your bindings!
****************************************
http://www.actionsportflicks.com
"DO NOT BITE SCROTUM" - Maximumsushi
http://www.actionsportflicks.com
"DO NOT BITE SCROTUM" - Maximumsushi
Quoting SEABURN from Mar 23 2008 10:56:41:
those line bindings were tanks and way to hard to adjust, I see them at my shop from time to time and I hate them more every time.
i was 13 when they came out and i figure out how to adjust them. its not hard. i got rid of those peices of shit though those line bindings were tanks and way to hard to adjust, I see them at my shop from time to time and I hate them more every time.
Martin Luther King had a dream, it was to put up a 200 foot high fence to keep Mexico out.
your a doctor, deal with it. mutha fucka
your a doctor, deal with it. mutha fucka
ok i am a certified tech and i will never tell someone what there din should be, again don't mess with your bindings take them to a shop
Quoting wiegz44 from Mar 6 2008 8:02:01:
yeah im 6'1 165 and put a type 3+ skier and my dins were set at like 8.5 or 9 and almost broke my ankle from them not releasing, so now i put a type 3 and my shop sets them to 7.5 and i dont mess with them at all and it works great
well that is your fault at 3+ you go down the chart to the next level which would be 8.5, at 7.5 it is a type 3yeah im 6'1 165 and put a type 3+ skier and my dins were set at like 8.5 or 9 and almost broke my ankle from them not releasing, so now i put a type 3 and my shop sets them to 7.5 and i dont mess with them at all and it works great
Truth be told man, I just won't post one of those questions.
Quoting TimmyK$ from Aug 13 2008 4:29:38:
well that is your fault at 3+ you go down the chart to the next level which would be 8.5, at 7.5 it is a type 3
If you are certified for all bindings like you say you are - then you would know that without knowing the BSL and the type of binding then there is NO WAY that you could tell him 8.5 is the setting for "+3" well that is your fault at 3+ you go down the chart to the next level which would be 8.5, at 7.5 it is a type 3
-------------------------------------
Kind Regards,
Simon.
Kind Regards,
Simon.
chea son
On a slightly different note: Should I really be trusting someone at SPORT CHEK/ SPORT MART...or another Big BOx Athletic Store to mount bindings on skis??? Are their techs really certified? I know someone is going to say don't buy from them....
my ex is a fat bitch..not phat...butt fat
Quoting OLDFRED3skiin... from Aug 29 2008 1:30:19:
On a slightly different note: Should I really be trusting someone at SPORT CHEK/ SPORT MART...or another Big BOx Athletic Store to mount bindings on skis??? Are their techs really certified? I know someone is going to say don't buy from them....
I suppose they have to be certified in order to actually mount bindings in order to avoid potential law suits and such, but if you wanted them center mounted or mounted in a specific spot I wouldn't trust them to get it right.On a slightly different note: Should I really be trusting someone at SPORT CHEK/ SPORT MART...or another Big BOx Athletic Store to mount bindings on skis??? Are their techs really certified? I know someone is going to say don't buy from them....
_____________
Well there ain't nothing wrong with the way she moves,
Scarlet begonias or a touch of the blues.
-------S.A.C.-------
Well there ain't nothing wrong with the way she moves,
Scarlet begonias or a touch of the blues.
-------S.A.C.-------
I work for Sport Chalet and yes we do have to be certified to do our binding mounts/adjustments, and we have all the jigs for the bindings we are certified to use. We get the same training as everyone else.
I can't say every one of the techs at the other stores can do center mounts, but there are a bunch of us who can.
I can't say every one of the techs at the other stores can do center mounts, but there are a bunch of us who can.
i have no problem with people taking their skis to a shop and getting their binders adjusted but when i take in a mounted pair of skis to get ground and beveled and they give them back to me with the din at 6 when i had them at 10. DONT FUCK WITH MY BINDINGS
that is all i ask
that is all i ask
__________________________________________
***********************************************************
7SPRINGS is so hot right now.
-------------------------------
***********************************************************
7SPRINGS is so hot right now.
-------------------------------
i got marker and salmon cert.
970 We don't drive an hour to the Mountains.
Quoting skithesprings$ from Sep 6 2008 11:35:29:
i have no problem with people taking their skis to a shop and getting their binders adjusted but when i take in a mounted pair of skis to get ground and beveled and they give them back to me with the din at 6 when i had them at 10. DONT FUCK WITH MY BINDINGS
that is all i ask
ya that's pretty gay, did you have a shop put them there in the first place? cause if not, they probably just could tell that it was way too high, but they shouldn't just change it without you asking
i have no problem with people taking their skis to a shop and getting their binders adjusted but when i take in a mounted pair of skis to get ground and beveled and they give them back to me with the din at 6 when i had them at 10. DONT FUCK WITH MY BINDINGS
that is all i ask
Quoting skithesprings$ from Sep 6 2008 11:35:29:
i have no problem with people taking their skis to a shop and getting their binders adjusted but when i take in a mounted pair of skis to get ground and beveled and they give them back to me with the din at 6 when i had them at 10. DONT FUCK WITH MY BINDINGS
that is all i ask
when a shop takes in a pair of skis to do ANYTHING to them they are basically saying "yes those skis are safe for you to ski on" basically if you crash and blow out your knee, you can turn around and say "they set my din too high". if i was a shop owner i sure as hell wouldn't want that so i'd make sure everyone's skis are set to what they should be.i have no problem with people taking their skis to a shop and getting their binders adjusted but when i take in a mounted pair of skis to get ground and beveled and they give them back to me with the din at 6 when i had them at 10. DONT FUCK WITH MY BINDINGS
that is all i ask
stop whining!
****************************************
"DO NOT BITE SCROTUM" - Maximumsushi
Quoting Pipe_Munky$ from Sep 23 2008 9:14:31:
when a shop takes in a pair of skis to do ANYTHING to them they are basically saying "yes those skis are safe for you to ski on" basically if you crash and blow out your knee, you can turn around and say "they set my din too high". if i was a shop owner i sure as hell wouldn't want that so i'd make sure everyone's skis are set to what they should be.
stop whining!
are you sure on the legalities of that? I am pretty sure that if you are not doing any binding work what so ever (just wax for example) that you aren't responsible for the safe release of the binding. Because most shops will wax/tune outdated technology but won't do binding work without the customer signing off. I am pretty sure there is a much bigger risk management issue with lowering the din without informing the customer then not touching it at all. when a shop takes in a pair of skis to do ANYTHING to them they are basically saying "yes those skis are safe for you to ski on" basically if you crash and blow out your knee, you can turn around and say "they set my din too high". if i was a shop owner i sure as hell wouldn't want that so i'd make sure everyone's skis are set to what they should be.
stop whining!
___________________________________________________
Yours Truly:
Sir Steven
Disclaimer:
The contributor to this forum post, their family or associates may hold investments or securities in any of the publicly traded companies being mentioned.
"I resigned from work fifty years ago! And what did I do besides read and write? Climb mountains, ski and make love to a wonderful woman..."
ya your tech shouldnt have touched your bindings if you didnt have binding work to be done on the ticket....
Quoting TimmyK$ from Aug 13 2008 4:29:38:
well that is your fault at 3+ you go down the chart to the next level which would be 8.5, at 7.5 it is a type 3
you're kinda slow hugh? you just said in a previous post you would not give any info about din settings then you just post that and you dont even know the BSL. where ever you work i'd be sure not to go there.well that is your fault at 3+ you go down the chart to the next level which would be 8.5, at 7.5 it is a type 3
970 We don't drive an hour to the Mountains.
im a certified shop tech and for some of you who dont no...they base ur dins off a chart or atleast the store i work at does and we use a automatic machine that is right almost every time to set bindings. i mean sometimes it comes out low or high but try out what the shop tells you and if ur poppin like crazy turn ur din up 1 see how that goes then turn it up again until ur good cuase is it really worth it to break your leg and have a higher din
"You put on your boots, click into your bindings, dust the snow off your skis, and head out for the chair, and it doesn't matter that you failed a test, didn't get the girl, or that your life is on a one way trip down the shitter, your world is right for the next couple of hours."
Quoting KravtZ from Sep 25 2008 10:19:29:
im a certified shop tech and for some of you who dont no...they base ur dins off a chart or atleast the store i work at does and we use a automatic machine that is right almost every time to set bindings. i mean sometimes it comes out low or high but try out what the shop tells you and if ur poppin like crazy turn ur din up 1 see how that goes then turn it up again until ur good cuase is it really worth it to break your leg and have a higher din
Coming late to the meeting eh? im a certified shop tech and for some of you who dont no...they base ur dins off a chart or atleast the store i work at does and we use a automatic machine that is right almost every time to set bindings. i mean sometimes it comes out low or high but try out what the shop tells you and if ur poppin like crazy turn ur din up 1 see how that goes then turn it up again until ur good cuase is it really worth it to break your leg and have a higher din
ON3P
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
Quoting KravtZ from Sep 25 2008 10:19:29:
im a certified shop tech and for some of you who dont no...they base ur dins off a chart or atleast the store i work at does and we use a automatic machine that is right almost every time to set bindings. i mean sometimes it comes out low or high but try out what the shop tells you and if ur poppin like crazy turn ur din up 1 see how that goes then turn it up again until ur good cuase is it really worth it to break your leg and have a higher din
I don't know if you should be certified im a certified shop tech and for some of you who dont no...they base ur dins off a chart or atleast the store i work at does and we use a automatic machine that is right almost every time to set bindings. i mean sometimes it comes out low or high but try out what the shop tells you and if ur poppin like crazy turn ur din up 1 see how that goes then turn it up again until ur good cuase is it really worth it to break your leg and have a higher din
-------------------------------------
Kind Regards,
Simon.
Kind Regards,
Simon.
Quoting KravtZ from Sep 25 2008 10:19:29:
im a certified shop tech and for some of you who dont no...they base ur dins off a chart or atleast the store i work at does and we use a automatic machine that is right almost every time to set bindings. i mean sometimes it comes out low or high but try out what the shop tells you and if ur poppin like crazy turn ur din up 1 see how that goes then turn it up again until ur good cuase is it really worth it to break your leg and have a higher din
you're certified?im a certified shop tech and for some of you who dont no...they base ur dins off a chart or atleast the store i work at does and we use a automatic machine that is right almost every time to set bindings. i mean sometimes it comes out low or high but try out what the shop tells you and if ur poppin like crazy turn ur din up 1 see how that goes then turn it up again until ur good cuase is it really worth it to break your leg and have a higher din
that is probably the worst possible advice i've heard. if you keep popping out, go see your local shop because there's a good chance that the forward pressure is not set properly on the bindings. if you keep dialing up the DIN, you're going to break a leg.
****************************************
"DO NOT BITE SCROTUM" - Maximumsushi
i agree with above i know that the machines are not good at setting dins you need to test the din every time also the din has alot of factors that contribute to it not just height weight sole length and ability but also but you need to take in to cnsideration the conditions and the type of skiing you are doing aso the general tech can't look at a chart and tell you based off of that you need to really know your stuff and def when settin for freestyle kids or back country even racing it all depends on wqhat is going on i change my din all the time based on conditions and believe it or not you should not adjust a half or whole number go quarters it work a hell of alot better the slightest movement in din can change alot even the way you ski
and i know i don't use punctuation
and i know i don't use punctuation
Quoting ^FRANK^ from Sep 30 2008 7:16:23:
i agree with above i know that the machines are not good at setting dins you need to test the din every time also the din has alot of factors that contribute to it not just height weight sole length and ability but also but you need to take in to cnsideration the conditions and the type of skiing you are doing aso the general tech can't look at a chart and tell you based off of that you need to really know your stuff and def when settin for freestyle kids or back country even racing it all depends on wqhat is going on i change my din all the time based on conditions and believe it or not you should not adjust a half or whole number go quarters it work a hell of alot better the slightest movement in din can change alot even the way you ski
and i know i don't use punctuation
No.
i agree with above i know that the machines are not good at setting dins you need to test the din every time also the din has alot of factors that contribute to it not just height weight sole length and ability but also but you need to take in to cnsideration the conditions and the type of skiing you are doing aso the general tech can't look at a chart and tell you based off of that you need to really know your stuff and def when settin for freestyle kids or back country even racing it all depends on wqhat is going on i change my din all the time based on conditions and believe it or not you should not adjust a half or whole number go quarters it work a hell of alot better the slightest movement in din can change alot even the way you ski
and i know i don't use punctuation
The reason there is a DIN chart is for that very reason.
The way you ski can have an effect, but not much.
The DIN is for the release value...which doesn't vary, it will take the same amount of force to release a DIN @ 10 while racing as it will while doing bumps, or back country or whatever...what will change is how much tension you need to hold you in properly....and release you properly.
ON3P
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
Quoting Love_Wins. from Sep 30 2008 7:29:41:
No.
The reason there is a DIN chart is for that very reason.
The way you ski can have an effect, but not much.
The DIN is for the release value...which doesn't vary, it will take the same amount of force to release a DIN @ 10 while racing as it will while doing bumps, or back country or whatever...what will change is how much tension you need to hold you in properly....and release you properly.
haha pwnd.No.
The reason there is a DIN chart is for that very reason.
The way you ski can have an effect, but not much.
The DIN is for the release value...which doesn't vary, it will take the same amount of force to release a DIN @ 10 while racing as it will while doing bumps, or back country or whatever...what will change is how much tension you need to hold you in properly....and release you properly.
what ever the din is set to, to your boot size/height/weight is how much weight( i believe in lbs/foot or somthing like that), is constant. when you change the din you change the amount of force it takes to release. obviously alot of these "shop guys" don't torque test or they would know this kind of info.
970 We don't drive an hour to the Mountains.
okay here we go first if you believe that you can go to alaska and ski real mountains like a helo and still be using the din you are you should prob be sucking on a fat one instead of doing that granted if you are askin for advise on your din you won't be doing that at all i did not say that your din releases you differently when your doing other things but yes i am saying that you might want to crank it up at times in order to insure not coming out caue if you drop in to pure pow like never been touched sixteen feet of it and you weigh 150 at 5'10'' with a sole length of about 317 you really don'[t want your din at five which would put your twist at 50 and fwd lean at 194.
hey Mr. torque test yes you do this however it is done to make sure the binding works correctly and release when it should
hey Mr. torque test yes you do this however it is done to make sure the binding works correctly and release when it should
just as a note they would be marker bindings
Quoting ^FRANK^ from Oct 2 2008 10:28:19:
okay here we go first if you believe that you can go to alaska and ski real mountains like a helo and still be using the din you are you should prob be sucking on a fat one instead of doing that granted if you are askin for advise on your din you won't be doing that at all i did not say that your din releases you differently when your doing other things but yes i am saying that you might want to crank it up at times in order to insure not coming out caue if you drop in to pure pow like never been touched sixteen feet of it and you weigh 150 at 5'10'' with a sole length of about 317 you really don'[t want your din at five which would put your twist at 50 and fwd lean at 194.
hey Mr. torque test yes you do this however it is done to make sure the binding works correctly and release when it should
Funny you should mention that...I live in Alaska.
okay here we go first if you believe that you can go to alaska and ski real mountains like a helo and still be using the din you are you should prob be sucking on a fat one instead of doing that granted if you are askin for advise on your din you won't be doing that at all i did not say that your din releases you differently when your doing other things but yes i am saying that you might want to crank it up at times in order to insure not coming out caue if you drop in to pure pow like never been touched sixteen feet of it and you weigh 150 at 5'10'' with a sole length of about 317 you really don'[t want your din at five which would put your twist at 50 and fwd lean at 194.
hey Mr. torque test yes you do this however it is done to make sure the binding works correctly and release when it should
Ok, so basically you're still wrong. All you've done is say that: "i did not say that your din releases you differently when your doing other things but yes i am saying that you might want to crank it up at times in order to insure not coming out" which essentially means that if you don't want your bindings to release you(which is most definitely less than safe in almost all situations) then you should increase your DIN, which everyone in here already knows.
DIN is a standard and it's constant. It doesn't release differently, etc. The only thing that will change is how much force you might want or need to hold you in, which is exactly what I said before.
ON3P
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
okay i'm lost on what you just said maybe cause i loose myself in what i say i'm just saying that there are times to adjust i did not say not to follow the chart at all i do but just like evrything else it is a guide line thats all i'm saying that you should take other things into consideration but always be sure you feel safe i'm not saying that if the chart says hey you should have your din at five you pump it up to ten at all i mean lets say turn it up to five and a quarter which makes a enough difference but won't put you at the point where your leg will break not sayin anything else
Alright, so now i do have a good safety question and why shops do things the way they do. I understand theres a problem with just crankin your bindings on the go and not testing them and all that stuff. But, I take my skis to the shop, say.....REI or Peter Glenn, about the only two shops that can get something done at a decent pace here in Anchorage, AK and i get my shit set up. I am 5'11", 192 lbs, with a 334mm sole length. 3+ skier. they set me up with a 9 din. which is awesome, never had a problem pre releasing or them staying on when its bail out time. I dont have a problem with them at all, i like them just how they are. What i want to know is i wrote my weight down at 192lbs, thats pretty much a pair of gym shorts and t-shirt, no shoes. With my gear on and depending on the day, say my Tecnica Agent 110's weigh, well shit i have no clue, its gotta be at least 7 lbs though easy. And im feeling spicy, so instead of skiing at Alyeska once again me and my bro's decide to ride the snowmachines up hatchers pass or something like that, so i have my pack on with my shovel probe and beacon in it, not to mention some water and granola. Pack weighs about 15 lbs or so. of course i have all my ski gear on to include helmet and goggles and jacket pants etc....all that probably weighs close to 8 more lbs. Now my total body weight is closer to 220 lbs now. How does this all work? Are din settings compensated for this extra weight? because the next day i may be over at Alyeska not needing all that extra gear/weight. What do you guys feel about this kind of situation and crankin up one half or one full setting? Im not a certified tech or even know or would even try to set up my own bindings, but ive been skiing for 13 years now with this same question. I cant just take my skis to a shop everytime i need them adjusted for day to day use. And i dont always adjust them, i usually just leave them where they are and dont even think about it.
Steve
Steve
Quoting SnowJumperAK from Oct 6 2008 4:52:21:
Alright, so now i do have a good safety question and why shops do things the way they do. I understand theres a problem with just crankin your bindings on the go and not testing them and all that stuff. But, I take my skis to the shop, say.....REI or Peter Glenn, about the only two shops that can get something done at a decent pace here in Anchorage, AK and i get my shit set up. I am 5'11", 192 lbs, with a 334mm sole length. 3+ skier. they set me up with a 9 din. which is awesome, never had a problem pre releasing or them staying on when its bail out time. I dont have a problem with them at all, i like them just how they are. What i want to know is i wrote my weight down at 192lbs, thats pretty much a pair of gym shorts and t-shirt, no shoes. With my gear on and depending on the day, say my Tecnica Agent 110's weigh, well shit i have no clue, its gotta be at least 7 lbs though easy. And im feeling spicy, so instead of skiing at Alyeska once again me and my bro's decide to ride the snowmachines up hatchers pass or something like that, so i have my pack on with my shovel probe and beacon in it, not to mention some water and granola. Pack weighs about 15 lbs or so. of course i have all my ski gear on to include helmet and goggles and jacket pants etc....all that probably weighs close to 8 more lbs. Now my total body weight is closer to 220 lbs now. How does this all work? Are din settings compensated for this extra weight? because the next day i may be over at Alyeska not needing all that extra gear/weight. What do you guys feel about this kind of situation and crankin up one half or one full setting? Im not a certified tech or even know or would even try to set up my own bindings, but ive been skiing for 13 years now with this same question. I cant just take my skis to a shop everytime i need them adjusted for day to day use. And i dont always adjust them, i usually just leave them where they are and dont even think about it.
Steve
My initial response is that I doubt it will make a difference.
Alright, so now i do have a good safety question and why shops do things the way they do. I understand theres a problem with just crankin your bindings on the go and not testing them and all that stuff. But, I take my skis to the shop, say.....REI or Peter Glenn, about the only two shops that can get something done at a decent pace here in Anchorage, AK and i get my shit set up. I am 5'11", 192 lbs, with a 334mm sole length. 3+ skier. they set me up with a 9 din. which is awesome, never had a problem pre releasing or them staying on when its bail out time. I dont have a problem with them at all, i like them just how they are. What i want to know is i wrote my weight down at 192lbs, thats pretty much a pair of gym shorts and t-shirt, no shoes. With my gear on and depending on the day, say my Tecnica Agent 110's weigh, well shit i have no clue, its gotta be at least 7 lbs though easy. And im feeling spicy, so instead of skiing at Alyeska once again me and my bro's decide to ride the snowmachines up hatchers pass or something like that, so i have my pack on with my shovel probe and beacon in it, not to mention some water and granola. Pack weighs about 15 lbs or so. of course i have all my ski gear on to include helmet and goggles and jacket pants etc....all that probably weighs close to 8 more lbs. Now my total body weight is closer to 220 lbs now. How does this all work? Are din settings compensated for this extra weight? because the next day i may be over at Alyeska not needing all that extra gear/weight. What do you guys feel about this kind of situation and crankin up one half or one full setting? Im not a certified tech or even know or would even try to set up my own bindings, but ive been skiing for 13 years now with this same question. I cant just take my skis to a shop everytime i need them adjusted for day to day use. And i dont always adjust them, i usually just leave them where they are and dont even think about it.
Steve
If it does, then after 13 years riding, you should feel ok adjusting them by .5 in either direction to compensate.
And lastly, try World Cup, they have far better techs, etc.
ON3P
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
Quoting Love_Wins. from Oct 6 2008 5:59:59:
My initial response is that I doubt it will make a difference.
If it does, then after 13 years riding, you should feel ok adjusting them by .5 in either direction to compensate.
And lastly, try World Cup, they have far better techs, etc.
Its the same way i feel, can it really make that huge of a difference?? im not saying its by the book right or anything but its something ive always thought about and done. I might have to check out world cup, i just picked up a set of Kung Fujas and i need to get my jesters mounted up. thanks for the response though and the tip!My initial response is that I doubt it will make a difference.
If it does, then after 13 years riding, you should feel ok adjusting them by .5 in either direction to compensate.
And lastly, try World Cup, they have far better techs, etc.
Quoting Silence$$ from Mar 5 2008 3:44:29:
there will come a time when someone tells another kid whose 5'5 140 to crank his FKS to 11 and he breaks his knee
I ROFL'D!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! there will come a time when someone tells another kid whose 5'5 140 to crank his FKS to 11 and he breaks his knee
TP UNIT
Swain is Fresh *ANYONE WANTS MOSS COLOR SIVER CARTEL IN XL AN L PM ME*!!!!!!!!!!
Swain is Fresh *ANYONE WANTS MOSS COLOR SIVER CARTEL IN XL AN L PM ME*!!!!!!!!!!
Quoting quebecfreesty...$ from Mar 5 2008 11:03:37:
bump
Can you explain in a nutshell what it means for a binding to be mounted at (for example) 308BSL ?bump
Also, How to calculate (when you buy used skis) if the holes already made will fit your bindings....
Ohkay, let's say i want to buy some 176 Trouble Makers mounted 308 BSL and fit my 120 FKS binding on it. I'd like it to be center mounted and my sole length is 315 mm. IS IT POSSIBLE !!!!!!?
I'd be very grateful for a decent answer
PM me for invite to the Bromont Freerider Cult!
**MINDFREEEEAAAAAAKKKKK!!!!**
Buddha1
**I Hate seeing magic tricks.... Now for the rest of the day il be trying to figure out how the heck you did that,...... **
Skier_kyle
Quoting I.ride.fat.tw... from Oct 15 2008 10:41:25:
Can you explain in a nutshell what it means for a binding to be mounted at (for example) 308BSL ?
Also, How to calculate (when you buy used skis) if the holes already made will fit your bindings....
Ohkay, let's say i want to buy some 176 Trouble Makers mounted 308 BSL and fit my 120 FKS binding on it. I'd like it to be center mounted and my sole length is 315 mm. IS IT POSSIBLE !!!!!!?
I'd be very grateful for a decent answer
There are a few things to consider here:
Can you explain in a nutshell what it means for a binding to be mounted at (for example) 308BSL ?
Also, How to calculate (when you buy used skis) if the holes already made will fit your bindings....
Ohkay, let's say i want to buy some 176 Trouble Makers mounted 308 BSL and fit my 120 FKS binding on it. I'd like it to be center mounted and my sole length is 315 mm. IS IT POSSIBLE !!!!!!?
I'd be very grateful for a decent answer
The BSL just means that is the boot sole length they were mounted to fit at the line for. Pretty simple.
Your question about fitting other boots depends on the bindings, FKS clamps have a very small margin of adjustment (I want to say 2mm in either direction, but don't quote me on that, cause I could be off), so in order to be able to fit without remounting, your boot would need to be in the range of adjustment for the particular binding in question.
Also consider that even if your boot does fit (which I'm guessing it won't in this situation, but most bindings have a lot more adjustment than FKS), depending on how much you adjust to fit your boot, it also moves the midsole line accordingly, so if you adjust the bindings 10mm back to let your bigger boot fit in for example, you just moved the line back 10mm from center.
ON3P
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
It would actually be moved back only 5mm.
Quoting EmbracedByLea... from Oct 19 2008 1:05:44:
It would actually be moved back only 5mm.
How do you figure? from Oct 19 2008 1:05:44:It would actually be moved back only 5mm.
ON3P
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
THE IDEA
____________________________________________________________________
"Nothing is impossible. You are only limited by fear and even that you can overcome."
-Seth Morrison
If you are adjusting the binding for a boot that is 10mm longer, the bootcenter is still in the middle of the boot. You are essentially adding 5mm to the toe length and 5mm to the heel, thus adding 10 total. So when you put it in the toepiece, its only moving back 5mm, the other 5 is compensated for by the heel sliding back on the track
Quoting EmbracedByLea... from Oct 19 2008 12:17:33:
If you are adjusting the binding for a boot that is 10mm longer, the bootcenter is still in the middle of the boot. You are essentially adding 5mm to the toe length and 5mm to the heel, thus adding 10 total. So when you put it in the toepiece, its only moving back 5mm, the other 5 is compensated for by the heel sliding back on the track
uhhh only if you're remounting it. if not then it moves back 1 cm. and u fail. from Oct 19 2008 12:17:33:If you are adjusting the binding for a boot that is 10mm longer, the bootcenter is still in the middle of the boot. You are essentially adding 5mm to the toe length and 5mm to the heel, thus adding 10 total. So when you put it in the toepiece, its only moving back 5mm, the other 5 is compensated for by the heel sliding back on the track
970 We don't drive an hour to the Mountains.
Quoting Pwn.Mode from Nov 6 2008 3:53:32:
uhhh only if you're remounting it. if not then it moves back 1 cm. and u fail.
That's kinda what I was thinking too...cause I'm not moving the toe forward, only the heel back. uhhh only if you're remounting it. if not then it moves back 1 cm. and u fail.
t h i r t e e n t h a n d p r o c t o r
haha, true that
All times are EST (-5); The current time is 1:29AM
<-- Back to thread listing - Previous Page
TEAM UPDATES
PARK UPDATES
BLOGGERS
CULT NEWS
